Popular Posts

Selasa, 29 Juni 2010

Choosing a good Cashing

It often happens to users who like to assemble your own computer to ignore the casing to bungkusnya.Sebagian there who liked the appearance and texture, there is also not concerned with it, reasonably important contents. Ok cashing penting.Satu not often forget things that are related to power supplay on tersebut.Sebagus cashing cashing any form that we use when PSU / her power supplay supplay motherboard does not meet the standards are condemned to constraints.
As the following constraints:
• The computer restarts itself like
Often hangs •
• elco on the motherboard easy convex
• Damaging the HDD motor, ultimately klek HDD sounds like when the computer turn on and off
• Proccessor easy hot due to the fan supplay less maximal PRC
• Definitely shorten Motherboard
This was at the beginning was not so great about the same effect by using the PSU is good, but the computer turns 3bln you will feel the constraints diatas.Walaupun your new computer is certainly no guarantee raft, much better if you do before assembling the computer knows it .
Some things to consider in choosing Cashing in
1. Casing Size

Large casing size would really help you. Surely you do not want to experience difficulties in the installation of components in a PC simply because the space is too narrow. And do not forget, width or thickness also must be considered. Casing is too thin, usually less biased accommodate additional cards may be installed on the PCI bus or AGP slot! In addition, with large casing size, such as ATX type, any size can all be built into the motherboard chassis. Large casing size, air flow inside the casing can be great. As a result, the overall system temperature can also cooler than wearing a tiny casing? 2. Bay and Port for Add-on Card

a. At the front of the casing, note, how many bays are mounted column aliases, either create a CD-ROM drive, DVD-ROM drive, or floppy drive. If you want to put just a CD-ROM and a floppy, bays that too much is not required. But who knows, you will also want to install a CD-RW drive or DVD drive. Or who knows you want to install an additional hard drive using removable media rack, which also demanded a place in this bay. Hence it is better to select a chassis number of bays for more! In general, the number of bays, there are three. If the bias to get four or five, definitely better!

b. Port for add-on card that was in the back of the casing should also note that you will not lack the time to install a variety of additional card. Casing is small, of course, have the add-on card that small. As a result, if you have additional cards based on PCI and AGP, not all can be installed at once. Large casing, usually have a port addon cards up to seven pieces, while the casing with a small size such as micro-ATX or baby AT, at best had only a fourth seed.

c. In the inner bay where there are mounting brackets for mounting such a peripheral hard drive, CD-ROM drive, and others. In some brands of casing, this was accompanied by additional rail bracket so that the user can easily remove and install peripherals such peripherals.

3. Place ExhaustFan

In the standard case, where the exhaust fan is usually only make one. However, in a nice casing, where the exhaust fan can be more than one. Generally consist of three, with details of two in the rear and one on the front. Unfortunately, only a few brands that can be fitted with exhaust fan in the front. In fact, precisely this section closest to the disk. Consequently, if there is exhaust fan in the front, hard drive space as well as the casing will remain awake cold.

4. Ventilation System

PC systems have a temperature so low, not just fan only as needed. Casing also play an important role for lowering the temperature. Now, if you are looking for a good chassis, note also features ventilated. Good indeed have sufficient air gap, both at the top, rear, or on the side. The more gaps you have, the better the air exchange within the same chassis!

5. Ease of Opening the Casing

Ease of opening the case was inversely related to security components from the hands of ignorant. However, make your usual tinkering, amenity open of course also be an important factor in choosing the casing. If used many brands are still using the cover of U shape, so right now, the casing on the market is much that can be opened only from one side only (sliding model). That means, users do not need to open the cover with difficulty.

6. Casing Thickness Plates

The thickness of the casing must also be considered because the casing is also determined whether or not stronger than this thickness. Many current casing is lightweight and stylish impression. But after use, so even a mild impression of drowning. That there was actually looking frail. To avoid this, we recommend you choose a chassis with adequate thickness. You can choose from aluminum with a thickness of 0.4, 0.6, or 0.8 millimeters. If less than that how? Can be ascertained once the casing is not too strong. It may also at any time the casing is dented when hit by load or fall. Find the casing with a thickness of 0.8 mm. Although a bit heavy, which would casing will withstand external shocks or pressures.

7. Note the outer shape!

If all the above factors have fulfilled all, did you consider the forms. If you want trendy, is now again its time begituan casing. There are so many forms and models you can choose the colors enough ngejreng! But once again, make the external forms as a final consideration!

0 komentar:

Posting Komentar